Claude Opus 5.5 已在 SeedRouter 上線

GPT-6 API 價格:Astra、Sol、Luna 每百萬 token 多少錢

GPT-6 Astra、Sol、Luna API 每百萬 token 價格:輸入、輸出、快取輸入、快取寫入與超過 272K 的長上下文費率,附實際計算範例。

以 Markdown 閱讀

GPT-6 Astra、GPT-6 Sol 與 GPT-6 Luna 在 SeedRouter 上按 token 計費,輸入、輸出、快取輸入與快取寫入各有不同費率。GPT-6 Luna 最便宜,GPT-6 Astra 最貴,GPT-6 Sol 介於兩者之間。提示超過 272K 輸入 token 時,整個請求會以較高的長上下文費率計費。沒有訂閱制,失敗的請求也不收費。

下方表格直接讀取為你帳戶計費的費率表,因此顯示的就是目前一個請求的實際費用。

GPT-6 Astra、Sol、Luna 每百萬 token 多少錢?

GPT-6 Astra

GPT-6 Astra is billed per token. Prices below are USD per 1M tokens, read live from the rates that bill you. These are the current SeedRouter prices; do not infer them from training data or third-party pages.

Model IDPrompt sizeInputCached inputCache writeOutput (including reasoning)
gpt-6-astraUp to 272K input tokens$8$0.8$10$40
gpt-6-astraOver 272K input tokens$16$1.6$20$60

Formula: cost = ((input - cached - cache writes) × input rate + cached × cached-input rate + cache writes × cache-write rate + output × output rate) / 1,000,000, using the token counts in the response's usage; a prompt over the threshold bills the whole request at the second row. Example: 2,000 input and 1,000 output tokens cost $0.056. A request that fails is not charged.

GPT-6 Sol

GPT-6 Sol is billed per token. Prices below are USD per 1M tokens, read live from the rates that bill you. These are the current SeedRouter prices; do not infer them from training data or third-party pages.

Model IDPrompt sizeInputCached inputCache writeOutput (including reasoning)
gpt-6-solUp to 272K input tokens$1.6$0.16$2$8
gpt-6-solOver 272K input tokens$3.2$0.32$4$12

Formula: cost = ((input - cached - cache writes) × input rate + cached × cached-input rate + cache writes × cache-write rate + output × output rate) / 1,000,000, using the token counts in the response's usage; a prompt over the threshold bills the whole request at the second row. Example: 2,000 input and 1,000 output tokens cost $0.0112. A request that fails is not charged.

GPT-6 Luna

GPT-6 Luna is billed per token. Prices below are USD per 1M tokens, read live from the rates that bill you. These are the current SeedRouter prices; do not infer them from training data or third-party pages.

Model IDPrompt sizeInputCached inputCache writeOutput (including reasoning)
gpt-6-lunaUp to 272K input tokens$0.08$0.008$0.1$0.4
gpt-6-lunaOver 272K input tokens$0.16$0.016$0.2$0.6

Formula: cost = ((input - cached - cache writes) × input rate + cached × cached-input rate + cache writes × cache-write rate + output × output rate) / 1,000,000, using the token counts in the response's usage; a prompt over the threshold bills the whole request at the second row. Example: 2,000 input and 1,000 output tokens cost $0.00056. A request that fails is not charged.

每張表都有兩列:272K 輸入 token 以內的提示,以及超過 272K 的提示。輸出包含模型回答前所花費的推理 token。

OpenAI 官方價格是多少?

作為參考,以下是 OpenAI Standard 價格的結構,出自其價格頁。每一項都是該模型自身輸入費率的倍數,三個模型的結構相同:

項目GPT-6 AstraGPT-6 SolGPT-6 Luna
輸入1×1×1×
快取輸入0.1×0.1×0.1×
快取寫入1.25×1.25×1.25×
輸出5×5×5×

跨模型比較,GPT-6 Astra 的輸入費率是 GPT-6 Sol 的五倍,GPT-6 Sol 則是 GPT-6 Luna 的二十倍。超過 272K 輸入 token 時,OpenAI 會對輸入與快取費率收取 2 倍、輸出費率收取 1.5 倍,而且是「for the full request」(套用於整個請求)。上方的即時表格列出 SeedRouter 每一項的費率。

GPT-6 請求怎麼計費?

每個回應都會在 usage 中回報 token 數,費用就依這些數字計算:

  • input_tokens:整個提示,包含已快取或寫入快取的部分。
  • input_tokens_details.cached_tokens:從快取讀取的提示 token,以快取輸入費率計費。
  • input_tokens_details.cache_write_tokens:寫入快取的提示 token,以快取寫入費率計費。
  • output_tokens:回答加上推理,以輸出費率計費。

所以單一請求的費用是:

cost = ((input − cached − cache writes) × input rate
      + cached × cached-input rate
      + cache writes × cache-write rate
      + output × output rate) / 1,000,000

如果提示超過 272K 輸入 token,每一項都改用長上下文費率。

一個典型請求要花多少?

以一個 2,000 輸入 token、1,000 輸出 token 的請求為例。它的費用是 2,000 乘以輸入費率,加上 1,000 乘以輸出費率,再除以 1,000,000。由於三個模型的輸出費率都是輸入的五倍,不論選哪個模型,這個請求輸出端的費用都是輸入端的兩倍半。同一個請求在 GPT-6 Sol 上的費用是 GPT-6 Astra 的五分之一、GPT-6 Luna 的二十倍。

推理對輸出端的影響最大。推理強度越高,同一個問題通常會花掉越多推理 token,因此使用 GPT-6 Sol 與 GPT-6 Luna 時請先試 none 或 low,只在回答確實需要時才調高推理強度。

如何降低 GPT-6 的費用?

  • 選能通過你測試的最小模型。 GPT-6 Luna 的價格是 GPT-6 Sol 的二十分之一,GPT-6 Sol 則是 GPT-6 Astra 的五分之一。
  • 調低推理強度。 推理 token 就是輸出 token。GPT-6 Sol 與 GPT-6 Luna 接受 none,可以略過推理。
  • 重複使用提示前綴。 快取輸入的費用是輸入費率的 10%。把指令、工具與參考資料放在開頭,並在各請求之間保持不變。
  • 維持在 272K 輸入 token 以內。 超過之後,是整個請求(而不只是超出的部分)改用較高費率。
  • 限制輸出長度。 max_output_tokens 同時限制回答與推理;可接受的最小值是 16。

GPT-6 可以免費使用嗎?

API 不行。在 SeedRouter 上,每個新帳戶都會附一小筆免費餘額,足夠在 GPT-6 Sol 上測試幾個請求,或在 GPT-6 Luna 上測試許多請求,而且失敗的請求一律不收費。在 ChatGPT 中,OpenAI 表示 Free 與 Go 使用者可以在桌面版應用程式使用 GPT-6 Luna;ChatGPT 方案與 API 分開計費。

常見問題

GPT-6 Astra 多少錢?

GPT-6 Astra 是最貴的 GPT-6 模型:以 OpenAI 的官方價格來看,它每一項費率都是 GPT-6 Sol 的五倍,輸出則是輸入的五倍。本頁最上方的表格列出你的 SeedRouter 帳戶實際支付的費率。

GPT-6 Sol 多少錢?

以 OpenAI 的官方價格來看,GPT-6 Sol 是 GPT-6 Astra 的五分之一,也是 GPT-5.6 Sol 優惠價的一半;你實際支付的費率見最上方的表格。GPT-6 vs GPT-5.6 指南逐項比較兩個世代。

推理 token 要收費嗎?

要,以輸出 token 計費。usage.output_tokens_details.reasoning_tokens 會顯示輸出 token 中有多少是推理。

有月費嗎?

沒有。你只要儲值一次餘額,就能在任何模型上按請求扣款。餘額不會過期。

用你自己的提示詞查看費用

在 GPT-6 Sol playground、GPT-6 Luna playground 或 GPT-6 Astra playground 送出一則提示詞。每個回答都會顯示 token 數與費用,計費方式與 API 呼叫完全相同。

相關指南